6. To open the staple cartridge clamp, pull the clamp in the direction shown.
7. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks
into the locked position.
WARNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
8. Grasp the orange handle, then insert the cartridge into the stapler assembly until the cartridge
clicks into place.
9. Close the finisher front door.
322
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Troubleshooting
To Next Page
Loading...
