Copy Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide 207
Original Type - Lightweight Originals
Sets whether to hide or show the [Lightweight Originals] option on the [Original Type]
screen.
Annotation - Stamp Size
Sets the character size of the predetermined phrase when you add [Stamp] in the
[Annotation] feature on the [Output Format] screen.
Annotation - Stamp Density
Sets the character density of the predetermined phrase when you add [Stamp] in the
[Annotation] feature on the [Output Format] screen.
Stamp Position on Side 2
Sets whether to position the character strings stamp in the same position on each side
of the paper when printing on both sides of the paper. This is when you use [Stamp] in
the [Annotation] feature on the [Output Format] screen.
Date Position on Side 2
Sets whether to position the date in the same position on each side of the paper when
printing on both sides of the paper. This is when you use [Date] in the [Annotation]
feature on the [Output Format] screen.
Page Number Position on Side 2
Sets whether to position page numbers in the same position on each side of the paper
when printing on both sides of the paper. This is when you use [Page Number] in the
[Annotation] feature on the [Output Format] screen.
Original Size Defaults
Use this feature to preset document size buttons. These are displayed when you use
the [Original Size] feature on the [Scan Options] screen. If you predefine frequently
used document sizes, you can set the size of the original, quickly and easily.
The [Original Size Defaults] screen consists of multiple pages.
1. Select [Original Size Defaults]
on the [Copy Mode Settings]
screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
To Next Page
Loading...
Need help?
General
