Xerox CopyCentre C128 User Manual

Send Options - Fax/Internet Fax
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide 99
NOTE: This feature is not displayed for Internet Fax transmissions. However, you can
use the same feature by specifying an F Code directly in the Internet Fax destination
address.
1. Select [F Code] on the [Send
Options] screen.
2. Perform the necessary
operations.
3. Select [Save].
Off
Disables the feature.
On
Sets the F Code transmission. [F Code] and [Password] are displayed at the right side
of the screen.
• F Code – You can enter an F Code composed of spaces, numbers (0–9), and
symbols (#, *) up to 20 characters. Enter the code using the numeric keypad on the
control panel.
• Password – You can enter a password composed of spaces, numbers (0–9), and
symbols (#, *) up to 20 characters. Enter the code using the numeric keypad on the
control panel.
Next
Sets the entered value and moves to the other entry field.
Internet Fax Profile
This feature allows you to specify a profile to restrict the attribute information for
transmissions between machines equipped with Internet Fax, such as image resolution
and paper size.
NOTE: This feature is not available for regular fax transmissions.
1. Select [Internet Fax Profile] on
the [Send Options] screen.
2. Select the required option.
3. Select [Save].
TIFF-S
This is the standard specification of Internet Fax for documents that are larger than A4.
Automatically reduces the size to A4 for transmission.
• Data compression: MH
• Stored Document Size: A4

Xerox CopyCentre C128 Specifications

General

Brand	Xerox
Model	CopyCentre C128
Category	All in One Printer
Language	English