Loading Print Media
3-4
DocuPrint P8ex Reference Guide
Loading Print Media
Using the
Multipurpose Paper
Feeder (MPF)
For best results, use high quality Xerox brand xerographic copier
paper.
1
Pull the extender on the MPF up until it stops
2
Before loading the paper, flex the sheets back and forth to loosen
them, then fan them. Tap the edges on a table top to straighten
them. Doing this before you load paper helps prevent paper jams.
Do not load too much. This feeder holds up to 150
sheets of plain paper (and the Face-down Stacker
holds up to 100 sheets.
3
Insert the paper in the MPF.
If the paper has a preferred print side, place the print side facing
you. If you use letterhead paper, load the paper with the letterhead
edge pointing down and the front facing toward you.
To Next Page
Loading...
Need help?
General