Xerox DocuPrint P8EX Reference Guide

Configuring the PCL Drivers
Chapter 4: Printing  4-3
Configuring the PCL Drivers
Selecting Your
Printer
To use all of the features of your DocuPrint P8ex, make sure it is
selected as the default printer. When you install the printer driver,
DocuPrint P8ex is automatically set as the default printer. If you use
more than one printer, select DocuPrint P8ex as the default printer
as follows:
Windows 95/98/NT 4.0
1
Select Start, Settings, then Printers.
2
Double-click Xerox DocuPrint P8ex PCL 6.
3
Select Set As Default Printer from the Printer menu.
4
To set the printer’s properties, select Properties from the Printer
menu and change the settings as described in the section “Setting
Properties” (page 4-4).
Windows 3.1x
1
Double-click Main from the Program Manager. Then double-click
Control Panel, and Printers.
2
Select Xerox DocuPrint P8ex PCL 6.
3
Click Set As Default Printer, then click Close.
4
To set the printer’s properties, click Setup and change the settings
as described in the section “Setting Properties” (page 4-4).
All manuals and user guides at all-guides.com

Xerox DocuPrint P8EX Specifications

General

Brand	Xerox
Model	DocuPrint P8EX
Category	Printer
Language	English