Xerox Phaser 3120 User Manual

3-10
Disassembly and Reassembly
Service Manual
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 3-2)
- Drive Ass’y(see page 3-5)
- Engine Shield Ass’y(see page 3-6)
2. Remove the Pick up Gear Ass’y, as shown
below.
3. Remove the Pick up Ass’y, as shown below.
Pick up Gear
Ass'y
Pick up Ass'y
1
2
Bush
3.13 Pick Up Roller
3.14 Solenoid
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 3-2)
- Drive Ass’y(see page 3-5)
- Engine Shield Ass’y(see page 3-6)
- Pick Up Roller(see page 3-10)
2. Remove two screw then remove The Manual
Solenoid and Pick Up Solenoid.
(Pick up)
Solenoid
(Manual)
Solenoid

Xerox Phaser 3120 Specifications

General

Brand	Xerox
Model	Phaser 3120
Category	Printer
Language	English