U
SING
P
RINT
M
ATERIALS
3.15
3
Printing on Card Stock or
Custom-sized Materials
Postcards, 3.5 by 5.83 in.(index) cards and other custom-sized
materials can be printed with this printer. The minimum size is
76 by 127mm(3.0 by 5.0 in.) and the maximum size is 216 by
356mm(8.5 by 14 in.).
1
Open the rear output tray. Load print material with print
side up, short edge first and against the left edge of the
feeder.
2
Adjust the guide to fit the width of the material.
Guidelines
• Always insert the short-edge into the Manual Feeder first. If
you want to print in landscape mode, make this selection
through your software. Inserting paper long-edge first may
cause a paper jam.
• Do not print on media smaller than 76mm (3.0 in.) wide or
127mm(5.0 in.) long.
• When you print on 76mm x 127mm sized media with loading
into the tray, open the rear output tray.
To Next Page
Loading...
Need help?
General