Xerox Phaser 3121 - Editing a Watermark; Deleting a Watermark

P RINTING T ASKS
4.21
4
Editing a Watermark
1 To change the print settings from your software application,
access the printer properties. See page 4.2.
2 Click the Other Features tab, and click the Edit button in
the Watermark section. The Watermarks window appears.
3 Select the watermark you want to edit in the Current
Watermarks list, and change the watermark message and
the options. Refer to “Creating a Watermark” on page 4.20.
4 Click Update to save the changes.
5 Click OK.
Deleting a Watermark
1 To change the print settings from your software application,
access the printer properties. See page 4.2.
2 From the Other Features tab, click the Edit button in the
Watermark section.
3 Select the watermark you want to delete in the Current
Watermarks list, and click Delete.
4 Click OK.