Xerox Phaser 3121 User Manual

P RINTING T ASKS
4.4
7 When you complete setting the properties, click OK until
the Print window is displayed.
8 Click OK to start printing.
Notes:
• Most Windows applications will override settings you specify in
the printer driver. Change all print settings available in the
software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are using
the current program. To make your changes permanent,
make them in the Printers folder. Follows this procedure.
1 Click the Windows Start button.
2 For Windows 9x/Me/NT/2000, select Settings, and then
Printers.
For Windows XP, select Printers and Faxes.
3 Select the Xerox Phaser 3121 printer.
4 Click the right mouse button on the printer icon and:
• In Windows 9x/Me, select Properties.
• In Windows 2000/XP, select Printing Preferences.
• In Windows NT, select Document Defaults.
5 Change the settings on each tab, and click OK.
Canceling a Print Job
There are two ways to cancel a print job.
To stop a print job from the Control Panel
Press the button on the control panel.

Xerox Phaser 3121 Specifications

General

Brand	Xerox
Model	Phaser 3121
Category	Printer
Language	English