P
RINTING
T
ASKS
4.9
4
From the software application
1
To change the print settings from your software application,
access the printer properties. See page 4.2.
2
Click the Graphics tab, and select the Toner Save option.
You can select from:
•Printer Setting: If you select this option, this feature is
determined by the setting you’ve made on the control
panel of the printer.
•On: Select this option to allow the printer to use less toner
on each page.
•Off: If you don’t need to save toner to print a document,
select this option.
3
Click OK.
To Next Page
Loading...
Need help?
General