Using SetIP (Phaser 3250DN only)
12
2 Select the name of your printer and click . If you cannot
find your printer name, click to refresh the list.
NOTES:
• To confirm the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. The NETWORK PRINTER CARD TEST
PAGE will be printed after the Configuration Page.
• The refreshed list doesn’t show your printer, click enter your
network printer card’s IP address, subnet mask, default gateway,
and then click Apply.
3 Click OK to confirm the settings.
4 Click Exit to close the SetIP program.
To Next Page
Loading...
