Xerox Phaser 3300MFP User Manual

16.2 < Specifications>
Scanner and copier specifications
Item Description
Compatibility
TWAIN standard / WIA standard
Scanning method ADF and Flat-bed Color CCD (Charge
Coupled Device) module
Resolution Optical: 600 x 1,200 dpi (mono and color)
Enhanced: 4,800 x 4,800 dpi
Effective scanning
length
Scanner glass: 297 mm
ADF: 356 mm
Effective scanning
width
Max 208 mm
Color bit depth 24 bit
Mono bit depth
1 bit for Black & White mode
8 bit for Gray mode
Copy speed
a
a. Copy Speed is based on Single Document Multiple Copy.
Up to 28 ppm in A4 (30 ppm in Letter)
Copy resolution Scan: up to 600 x 300 (text, text/photo)
up to 600 x 600 (photo using platen)
up to 600 x 300 (photo using ADF)
Print: up to 600 x 600 (text, text/photo, photo)
Zoom rate Scanner glass: 25 to 400%
ADF: 25 to 100%
Multiple copies
1 to 99 pages
Grayscale 256 levels
Facsimile specifications
Item Description
Compatibility
ITU-T Group 3
Applicable line Public Switched Telephone Network (PSTN)
or behind PABX
Data coding MH/MR/MMR/JPEG/ECM (Error Correction
Mode)
Modem speed
33,6 Kbps
Transmission
speed
Approx. 3 seconds/page
a
a. Standard resolution, MMR(JBIG), Maximum modem speed, Phase ”C” by ITU-T
No. 1 chart, Memory Tx, ECM.
Maximum
document length
Scanner glass: 297 mm
Automatic document glass: 356 mm
Resolution Standard: 203 x 98 dpi
Fine: 203 x 196 dpi
Super Fine: 300 x 300 dpi
Photo: 203 x 196 dpi
Color: 200 x 200 dpi
Memory 6 MB
Halftone
256 levels
Auto dialer
Speed dialing (up to 240 numbers)

Xerox Phaser 3300MFP Specifications

General

Brand	Xerox
Model	Phaser 3300MFP
Category	All in One Printer
Language	English