1Welcome
6 Xerox Phaser 3635MFP User Guide
Safety
Read these safety notes carefully before using this product to ensure you
operate the equipment safely.
Your Xerox product and supplies have been designed and tested to meet strict
safety requirements. These include Safety Agency approval, and compliance
to established environmental standards. Please read the following instructions
carefully before operating the product and refer to them as needed to ensure
the continued safe operation of your product.
The safety testing and performance of this product have been verified using
XEROX materials only.
Follow all warnings and instructions marked on, or supplied with the product.
This WARNING mark alerts users to the possibility of personal injury.
This WARNING mark alerts users to heated surfaces.
WARNING: This symbol indicates a Laser
is being used in the equipment
and alerts the user to refer to the appropriate safety information.
WARNING: This product must be connected to a protective earthing
circuit.
Operator Accessible Areas
This equipment has been designed to provide operator access to safe areas
only. Operator access to hazardous areas is restricted using covers or guards,
which require a tool to enable removal. Never remove these covers or guards.
Maintenance Information
1. Any operator product maintenance procedures will be described in the
user documentation supplied with the product.
2. Do not carry out any maintenance on this product which is not described
in the customer documentation
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be
explosive or flammable when used on electromechanical equipment.
3. Use supplies and cleaning materials only as directed in the Operator
section of this manual.
To Next Page
Loading...
