11 Setups
Xerox Phaser 3635MFP User Guide 183
pathway. Any remaining services will be accessible through the Services
Home button.
Tools > User Interface > General > Screen Defaults > Feature Default and
Priority
Language Default
Use this feature to set the User Interface language.
Tools > Device Settings > General >Language > Default and Priority
Audio Tones
Use this feature to enable or disable one of the following audio tones:
When enabled, the tones can be set to either low, medium or high. Press the
Test button to test the tone volume. Select Save to confirm the settings.
Tools > User Interface > General > Audio Tones
Tone Description
Fault Tone Sounds when there is a fault on the machine.
Conflict Tone Sounds when there is a system setting conflict.
Selection Tone Sounds when a button is selected.
To Next Page
Loading...
