11 Setups
166 Xerox Phaser 3635MFP User Guide
Accessing Tools
All the machine setup features are in the Tools menu, accessed through the
Log In/Out and Machine Status buttons on the control panel.
1. Press the Log In/Out button on the control panel.
2. Use the number keypad to enter the default password - 1111. Select
Enter on the touch screen.
3. Press the Machine Status button.
4. Select the Tools tab.
NOTE: 1111 is the factory set default password. It is recommended that you
change this password. For information on changing passwords, select the
Help button on the machine keypad.
To Next Page
Loading...
