5 Network Scanning
88 Xerox Phaser 3635MFP User Guide
2. Select Network Scanning on the touch screen. Ensure that the Network
Scanning screen is displayed.
NOTE: If an authentication feature is enabled, you may need an account
number before using the machine. To get an account number, or for more
information, contact the System Administrator.
3 Select Network Scanning Template
Network Scanning uses preset templates created by the System
Administrator. These templates already contain feature settings customized to
the user. Use the up/down scroll buttons located to the right of the Template
List on the Network Scanning tab to move through the list and select a
Template.
To get quickly to a specific page in the Template list, use the number keypad
to identify the page number then select the pound (#) key. The counter will
display the page location.
For more information on Network Scanning templates, refer to Network
Scanning on page 92.
4 Change Feature Settings
To temporarily change the template settings, perform the following:
1. Press the Clear All button once on the control panel to cancel any
previous selections. The control panel returns to the default Entry
screen.
To Next Page
Loading...
