Front Panel Messages
Phaser™ 4500 Laser Printer
4-35
Tray {2/3/4] Paper Is Low The indicated tray is nearly emplty. Reload the same size
and type of paper soon.
Out Of Paper; Load Tray [1/2/3/4] with
[size][type]
Load the indicated paper size and type into the indicated
tray.
Wrong Paper Size; Load Tray [1/2/3/4]
with [size][type]
Replace the paper in the indicated tray with paper of the
indicated size and type.
Paper Not Available; Load Tray [1/2/3/
4] with {size][type]
Replace the paper in the indicated tray with paper of the
indicated size and type. Or select Print with Available
Paper to use a paper size and type currently in the printer.
Standard Output Tray is Full. Unload
Paper.
Remove the paper from the indicated output tray.
Stacker Is Full. Unload Paper. Remove the paper from the indicated output tray.
Toner Is Low. The Print Cartridge is almost empty. Order replacement.
Maintenace Kit Is Near End Of Life. The Maintenance Kit (Fuser, Bias Transfer Roller, and feed
rollers) is near the enod of its life. Warning - when the
Fuser is replaced, use caution, some components inside
the rear cover may be hot. Order replacement.
Replace Print Cartridge 1. Open the Top Cover.
2. Replace Print Cartridge.
3. Refer to the pictorial installation instructions on the
Print Cartridge itself.
4. Close the Top Cover.
Error or Warning Messages (Continued)
Message Description
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General