Xerox Phaser 4500

Phaser™ 4500 Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
2-28
Transparencies
This topic includes:
■ "Guidelines" on page 2-28
■ "Printing Transparencies from Trays 1-4" on page 2-28
Xerox Clear Transparencies can be printed from any tray. They should be printed on one side
only. To order Xerox Clear Transparencies, contact your local reseller.
Guidelines
■ Remove all paper before loading transparencies in the tray.
■ Do not load transparencies above the fill line; it may cause the printer to jam.
■ Handle transparencies by the edges using both hands to avoid fingerprints and creases
which can cause poor print quality.
■ Do not use transparencies with stripes on the side.
■ Change the paper type at the front panel for all trays.
■ Use Xerox Clear Transparencies; print quality may vary with other transparencies.
For more information on paper types, weights, and sizes, go to Reference/Printing/Supported
Papers on the User Documentation CD-ROM.
Printing Transparencies from Trays 1-4
1. Pull the tray completely out of the printer.
Videos are available with instructions for loading transparencies. Videos are
located on the User Documentation CD-ROM and at www.xerox.com/office/
4500support.
4500-001
Downloaded From ManualsPrinter.com Manuals