Phaser™ 4500 Laser Printer
A-4
■ Do not place the printer in line with the cold air flow from an air conditioning system.
■ Place the printer on a level, solid non-vibrating surface with adequate strength for the
weight of the printer. It should be within 2 degrees of horizontal with all four feet in solid
contact with the surface. The base printer weight without any packaging materials is
approximately 20.5 kg (45.2 lbs.).
Printer Supplies
■ Use the supplies specifically designed for your printer. The use of unsuitable materials
may cause poor performance and a possible safety hazard.
■ Follow all warnings and instructions marked on, or supplied with, the printer, options and
supplies.
Caution
If you attempt to use a non-Xerox print cartridge, it may not fit properly in the printer. If
the cartridge does not fit properly, the printer will not function.
Moving the Printer
■ Always use two people to lift the printer.
■ Always turn off the printer using the power switch and unplug all cables and cords.
■ Always lift the printer from the designated lift points.
■ Do not place any food or liquids on the printer.
■ Failure to repackage the printer properly for shipment can result in damage to the printer
not covered by the warranty, service agreement, or Total Satisfaction Guarantee. The Total
Satisfaction Guarantee is available in the United States and Canada. Coverage may vary
outside these areas; please contact your local representative for details.
4500-071
21 kg
45 lbs.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General