Connections and IP Address
Phaser™ 4500 Laser Printer
3-9
2. Enter your printer's IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Select Properties.
4. Select the Protocols folder on the left sidebar.
5. Select TCP/IP.
6. In the BOOT/DHCP Settings section, set the BOOTP/DHCP option to ON.
7. To enable DDNS, enter the following DDNS/WINS settings information:
■ DDNS - Set to ON.
■ Release Host Name - Set to NO.
■ DDNS/WINS Name - Use the default name provided by Xerox or enter another
name.
■ Primary WINS Server (optional)
■ Secondary WINS Server (optional)
8. Click Save Changes when you are finished entering the settings.
Other Resources
For more information about network setup and troubleshooting, go to Reference/Connections
& Networks on the User Documentation CD-ROM.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
