Phaser® 4510 Laser Printer
A-2
Relative Humidity
■ Storage: 5% to 85% (non-condensing)
■ Operating: 15% to 85%
Humidity should be 70% or below at 90° F, and 85% or below when the temperature is
lower than 82° F.
Electrical Specifications
Available in two models:
■ 110-120 VAC, 60 Hz
■ 220 VAC, 50 Hz
E
NERGY STAR qualified printer (Phaser 4510DT and Phaser 4510DX configurations)
Default time to Power Saver: 60 minutes
Performance Specifications
Resolution
Maximum Resolution: True 1200 x 1200 dpi
Print Speed
Maximum Print Speed: 45 ppm Letter, 43 ppm A4
Controller Specifications
533 MHz processor
Memory
■ 128 MB RAM (maximum of 512 MB installed memory in two slots)
Page Description Languages (PDL)
■ PCL5e and 6.0
■ Adobe PostScript 3
■ Adobe PDF-Direct V1.4
Residential Fonts
■ 139 PostScript Type 1
■ 81 PCL
To Next Page
Loading...
