Description of Menu Items
Phaser® 6125 Color Laser Printer
5-9
Maintenance Mode
Use this menu to initialize the NVM, or to adjust the configurations for each type of paper.
Auto Log Print Specifies whether to automatically print information about the printed data that
has been processed in the printer (Job History Report).
■ Off (default)
Select this if you do not want to print the Job History Report automatically
even if the number of print jobs exceeds 22.
■ On
Automatically prints a report when the number of print jobs reaches 22.
■ You cannot set this during printing.
■ You can print the Job History Report from the Information Pgs menu.
■ You need to restart the printer to activate the new settings. After making the
settings, turn off the printer and then turn it on again.
Size Mismatch Specifies whether to print on paper loaded in another tray when there is no paper
left in the tray selected by the auto tray selection feature.
■ Off (default)
Select this to display a message prompting you to load paper.
■ Larger Size
Select this to replace the paper with a larger size paper before printing in
100% magnification ratio.
If a computer issues the instruction about paper selection, it overwrites this
setting.
mm/inch Set the units for the custom paper size to millimeters (mm) or inches.
■ millimeter (mm) (default)
The paper size is displayed in millimeters.
■ inch (")
The paper size is displayed in inches.
Startup Page
■ On (default)
■ Off
Item Description
Auto Regi Adjust Adjust the color registration automatically. Selecting On adjusts the color
registration automatically. The default is On.
Adjust ColorRegi Correct the color registration manually. For details, refer to Color Registration on
page 6-6.
■ Auto Adjust
Correct the color registration.
■ Color Regi Chart
Prints the correction chart.
■ Enter Number
Enter the number to correct the registration.
Clear Developer Resolves PQ defects associated with charge problems after high coverage print
jobs.
Item Description
To Next Page
Loading...
