Xerox PHASER 6130 - Page 135

Phaser® 6130 Printer
Index-1
Index
A
AutoIP
manually setting the printer’s IP
address, 3-7
setting the printer’s IP address
dynamically, 3-6
automatically setting the printer’s IP address
(Windows only), 3-5
available printer drivers, 3-9
B
billing meters, 5-6
total printed pages, 8-9
C
caution symbols, 1-7
CentreWare IS
changing or modifying the printer’s IP
address, 3-8
checking status, 2-9
enabling DHCP, 3-6
managing printer, 8-5
online help for, 8-5
setting the printer’s IP address
dynamically, 3-6
starting, 8-5
checking printed pages
how to check the meter, 8-9
choosing a network connection, 3-3
cleaning
printer, 8-2
printer exterior, 8-2
printer interior, 8-2
clearance
location of the printer, 1-4
color registration
adjusting, 6-6
automatic adjustment, 6-6
determining values, 6-7
enabling/disabling automatic
adjustment, 6-8
entering values, 6-7
manual adjustment, 6-6
printing the correction chart, 6-6
configuration
optional accessories, 2-10
configuring the network address, 3-5
connection
Ethernet, 3-3
USB, 3-4
consumables, 8-3
error messages, 7-12
control panel, 2-6
Configuration page, 2-7
display, 2-6
error messages, 7-12
information pages, 2-7
layout, 2-6
Menu Map, 2-7
menus, 5-2
messages, 7-16
control panel menus
changing settings, 5-3
control panel, 5-14
description of, 5-4
information pages, 5-5
maintenance mode, 5-11
PCL printer driver, 5-12
PostScript printer driver, 5-13
system settings, 5-9
tray settings, 5-4
USB setup, 5-8
custom paper
defining size
with PCL driver, 4-31
with PostScript driver, 4-32
custom size paper, 4-31
printing from the paper tray, 4-32
supported for the paper tray, 4-31
D
DHCP
enabled by default on Phaser printers, 3-6
enabling on the control panel, 3-6
enabling with CentreWare IS, 3-6
manually setting the printer’s IP
address, 3-7
setting the printer’s IP address
dynamically, 3-6