Selecting Printing Options
Phaser® 6130 Printer
4-15
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before
sending the job to the printer. For example, if you want to use Enhanced print-quality mode for
a particular graphic, select this setting in the driver before printing that job.
1. With the desired document or graphic open in your application, access the Print dialog
box.
2. Select the Phaser 6130 printer and click its Properties button to open the printer driver.
3. Make selections from the driver tabs. See the following table for specific printing options.
Note: In the PCL driver for Windows 2000, Windows XP, Windows Server 2003, and
Windows Vista, you can save current printing options with a distinctive name and apply
them to other print jobs. Select Saved Settings at the bottom of the tab. Click the Help
button for more information.
4. Click the OK button to save your selections.
5. Print the job.
To Next Page
Loading...
