Description of Menu Items
Phaser® 6130 Printer
5-4
Description of Menu Items
This section includes:
■ Tray Settings on page 5-4
■ Information Pages on page 5-5
■ Billing Meters on page 5-6
■ Admin Menu on page 5-6
Tray Settings
There is one submenu under the Tray Settings menu: Tray. You can set paper size, paper type,
or Display Popup for this tray.
Common Settings for the Paper Tray
When the size or type of paper that is loaded is different from the setting, the print quality may
fall or paper may jam. Specify the correct paper type and size.
When the paper size and type setting for each tray is the same, printing continues by changing
the feeding tray if the paper in the specified tray has run out.
Item Description
Paper Type Specifies the type of paper loaded in the paper tray. The default is
Plain.
For details, refer to Setting Paper Types and Sizes on page 4-7.
Paper Size Specify the paper size and orientation for the paper tray. The default is
Auto.
For details, refer to Setting Paper Types on page 4-7.
Display Popup Specifies whether or not to display the message that prompts you to
set the paper size and type every time you load paper in the tray.
When you select On, the message that prompts you to set the paper
size and type is displayed.The default is Off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
