EasyManuals Logo
Home>Xerox>Printer>PHASER 6130

Xerox PHASER 6130 User Guide

Xerox PHASER 6130
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
User Safety
Phaser® 6130 Printer
1-3
If you notice unusual noises or odors:
1. Turn off the printer immediately.
2. Disconnect the power cord from the electrical outlet.
3. Call an authorized service representative to correct the problem.
The power cord is attached to the printer as a plug-in device at the back of the printer. If it is
necessary to disconnect all electrical power from the printer, disconnect the power cord from
the electrical outlet.
Warning: Do not remove the covers or guards that are fastened with screws unless you are
installing optional equipment and are specifically instructed to do so. Power should be OFF
when performing these installations. Except for user-installable options, there are no parts that
you can maintain or service behind these covers.
Note: Leave the printer on for optimum performance; it does not pose a safety hazard. If
however the printer will not be used over an extended period of time, it should be turned off
and unplugged.
The following are hazards to your safety:
The power cord is damaged or frayed.
Liquid is spilled into the printer.
The printer is exposed to water.
If any of these conditions occur, do the following:
1. Turn off the printer immediately.
2. Disconnect the power cord from the electrical outlet.
3. Call an authorized service representative.
Laser Safety
With specific regard to lasers, this printer complies with laser product performance standards
set by governmental, national, and international agencies and is certified as a Class 1 Laser
Product. The printer does not emit hazardous light because the beam is totally enclosed during
all modes of customer operation and maintenance.
Maintenance Safety
Do not attempt any maintenance procedure that is not specifically described in the
documentation supplied with your printer.
Do not use aerosol cleaners. The use of supplies that are not approved may cause poor
performance and could create a hazardous condition.
Do not attempt to open, reuse, or burn any consumables or routine maintenance items. For
information on Xerox supplies recycling programs, go to www.xerox.com/gwa
.

Table of Contents

Other manuals for Xerox PHASER 6130

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox PHASER 6130 and is the answer not in the manual?

Xerox PHASER 6130 Specifications

General IconGeneral
ColorYes
Print technologyLaser
Maximum resolution2400 x 600 DPI
Warm-up time (from sleep mode)25 s
Time to first page (black, normal)14 s
Time to first page (color, normal)17 s
Print speed (black, normal quality, A4/US Letter)16 ppm
Print speed (color, normal quality, A4/US Letter)12 ppm
Maximum internal memory1152 MB
Sound power level (standby)25.7 dB
Sound pressure level (printing)51.6 dB
Total input capacity250 sheets
Total output capacity150 sheets
Maximum input capacity251 sheets
Media weight (tray 1)64 - 220 gsm
Multi-Purpose Tray media weight64 - 164 g/m²
FunctionsPrint
I/O ports10/100BaseTX Ethernet, USB 2.0
Device managerAuto IP, BOOTP/RARP, DHCP, PrintingScout Alert Notification, SNMP v.2, Xerox CentreWare Internet Services Embedded Web Server, Email alerts
Package length558.79 mm
Depth (imperial)17.5 \
Width (imperial)15.75 \
Height (imperial)15.3 \
Security featuresSecure Print
Power requirements220–240 VAC, 50/60 Hz
Networking features10/100 Base-TX Ethernet
Color space standardICM, ICC, PANTONE Color Approved
Enhanced scan resolution600 x 600 DPI
Storage temperature (T-T)32 - 95 °F
Power consumption (active)280 W
Compatible operating systemsWindows 2000/2003 Server/XP/XP Home Edition (SP1 +)/ Vista, Mac OSX 10.2 +, Linux: SUSE 9.2 +/Turbo Linux 10/ Red Hat ES3 +/Fedora Core/Yellow Dog 3.X
Acoustic power emissions (standby)43 dB
Non-operating relative humidity (non-condensing)15 - 85 %
Acoustic power emissions (active, print, copy or scan)64.6 dB
PCL fonts81
Printer fontsPCL, PostScript
Country of originChina
Maximum duty cycle40000 pages per month
Recommended duty cycle3000 pages per month
Number of PostScript fonts136
Sustainability certificatesENERGY STAR
Power consumption (standby)50 W
Power consumption (PowerSave)5 W
Operating temperature (T-T)5 - 32 °C
Operating relative humidity (H-H)15 - 80 %
CertificationFCC 15 B, UL 60950-1/CSA 60950-1-03, CE Mark 73/23/EEC, 89/336, EEC, Section 508 ADA
Package width533.39 mm
Package height507.99 mm
Package weight22226.4 g
Weight and Dimensions IconWeight and Dimensions
Depth445 mm
Width400 mm
Height389 mm
Dimensions (WxDxH)400 x 394 x 389 mm

Related product manuals