EasyManuals Logo
Home>Xerox>Printer>PHASER 6130

Xerox PHASER 6130 User Guide

Xerox PHASER 6130
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Printing Custom Size
Phaser® 6130 Printer
4-32
6. To assign a paper name, select the Name Paper Size check box, and then enter the name
in Paper Name. Up to 14 characters can be used for the paper name.
7. If necessary, repeat steps 4 to 6 to define another custom size.
8. Click OK twice.
Using the PostScript Driver
On the PostScript print driver, set the custom size in the Custom Paper Size dialog box. This
section explains the procedure using Windows XP as an example.
1. From the Start menu, select Settings, click Printers and Faxes, and then display the
properties of the printer to be used.
2. Select the General tab.
3. Click the Printing Preferences button.
4. From Paper Size, select Custom Paper Size.
5. Specify the length of the short edge and long edge under Setting For. You can specify the
values either by entering them directly or using the Up Arrow and Down Arrow buttons.
The length of the short edge cannot be longer than the long edge, even if it is within the
specified range. The length of the long edge cannot be shorter than the short edge, even if
it is within the specified range.
6. Click OK.
Printing on Custom Size Paper
Use the following procedures to print using either the PCL or PostScript drivers.
Using the PCL Driver
The procedure to print on custom size paper using the PCL print driver is as follows.
Note: The way to display the printer Properties dialog box differs according to the
application software. Refer to the manual of your respective application software.
1. From the File menu, select Print.
2. Select this printer as the printer to be used and click Preferences.
3. Select the Paper/Output tab.
4. Select the appropriate paper tray from Paper Tray.
5. Select the appropriate paper type from Paper Type.
6. From Paper Size, select the size of the original document.
7. Click the Layout tab.
8. From Output Size, Fit to New Paper Size defaults to Same As Paper Size.
9. Click OK.
10. Click Print in the Print dialog box to start printing.

Table of Contents

Other manuals for Xerox PHASER 6130

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox PHASER 6130 and is the answer not in the manual?

Xerox PHASER 6130 Specifications

General IconGeneral
ColorYes
Print technologyLaser
Maximum resolution2400 x 600 DPI
Warm-up time (from sleep mode)25 s
Time to first page (black, normal)14 s
Time to first page (color, normal)17 s
Print speed (black, normal quality, A4/US Letter)16 ppm
Print speed (color, normal quality, A4/US Letter)12 ppm
Maximum internal memory1152 MB
Sound power level (standby)25.7 dB
Sound pressure level (printing)51.6 dB
Total input capacity250 sheets
Total output capacity150 sheets
Maximum input capacity251 sheets
Media weight (tray 1)64 - 220 gsm
Multi-Purpose Tray media weight64 - 164 g/m²
FunctionsPrint
I/O ports10/100BaseTX Ethernet, USB 2.0
Device managerAuto IP, BOOTP/RARP, DHCP, PrintingScout Alert Notification, SNMP v.2, Xerox CentreWare Internet Services Embedded Web Server, Email alerts
Package length558.79 mm
Depth (imperial)17.5 \
Width (imperial)15.75 \
Height (imperial)15.3 \
Security featuresSecure Print
Power requirements220–240 VAC, 50/60 Hz
Networking features10/100 Base-TX Ethernet
Color space standardICM, ICC, PANTONE Color Approved
Enhanced scan resolution600 x 600 DPI
Storage temperature (T-T)32 - 95 °F
Power consumption (active)280 W
Compatible operating systemsWindows 2000/2003 Server/XP/XP Home Edition (SP1 +)/ Vista, Mac OSX 10.2 +, Linux: SUSE 9.2 +/Turbo Linux 10/ Red Hat ES3 +/Fedora Core/Yellow Dog 3.X
Acoustic power emissions (standby)43 dB
Non-operating relative humidity (non-condensing)15 - 85 %
Acoustic power emissions (active, print, copy or scan)64.6 dB
PCL fonts81
Printer fontsPCL, PostScript
Country of originChina
Maximum duty cycle40000 pages per month
Recommended duty cycle3000 pages per month
Number of PostScript fonts136
Sustainability certificatesENERGY STAR
Power consumption (standby)50 W
Power consumption (PowerSave)5 W
Operating temperature (T-T)5 - 32 °C
Operating relative humidity (H-H)15 - 80 %
CertificationFCC 15 B, UL 60950-1/CSA 60950-1-03, CE Mark 73/23/EEC, 89/336, EEC, Section 508 ADA
Package width533.39 mm
Package height507.99 mm
Package weight22226.4 g
Weight and Dimensions IconWeight and Dimensions
Depth445 mm
Width400 mm
Height389 mm
Dimensions (WxDxH)400 x 394 x 389 mm

Related product manuals