Xerox PHASER 6130 - Page 94

Description of Menu Items
Phaser® 6130 Printer
5-13
PostScript
Specifies the settings for PostScript.
Line Termination Sets the line termination.
■ Off (default)
The line termination command is not added.
CR=CR, LF=LF, FF=FF
■ Add-LF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
■ Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
■ CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Default Color Specifies the color mode to Color or Black. This settings is used when the color
printing mode setting is not specified for the print job that is sent to the printer.
■ Black (default)
Prints in black and white mode.
■ Color
Prints is the color mode.
Item Description
PS Error Report
■ On (default)
■ Off
PS Job Time-Out
■ Off (default)
■ On
Paper Select Mode Auto (default)
Output Color ■ Color (default)
■ Black
Item Description