Xerox PHASER 7500 System Administrator Guide

Phaser 7500 Color Printer
System Administrator Guide
65
A
Configuration Card
The printer has a configuration card that stores network parameters and configuration data. The
configuration card is hot swappable, enabling you to share or replace it, providing an alternative to
onsite service.
Network settings are saved on the configuration card. If the configuration card is removed from an old
printer and inserted into a new printer, the saved settings on the configuration card are copied to the
new printer when it is powered on. The new printer assumes the identity of the old printer, eliminating
the need to reconfigure network settings.
This appendix includes:
• General Information Parameters on page 66
• PostScript Parameters on page 66
• PCL Parameters on page 67
• USB 2.0 Parameters on page 67
• Hard Drive Parameters on page 67
• Network Information Parameters on page 67
• Ethernet Network Parameters on page 67
• EtherTalk Parameters on page 68
• TCP/IP Parameters on page 68
• DNS Parameters on page 68
• SLP Parameters on page 69
• SSDP Parameters on page 69
• NBNS (WINS) Parameters on page 69
• Access Control Parameter on page 69
• LPR Parameters on page 69
• AppSocket (Port 9100) Parameters on page 69
• IPP (Internet Printing Protocol) Parameters on page 69
• SNMP Parameters on page 70
• CentreWare IS (HTTP) Parameters on page 70
• FTP Parameters on page 70
• Status Notification Parameter on page 70
• MaiLinX Remote Printing Parameters on page 70

Xerox PHASER 7500 Specifications

General

Max Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Standard Paper Capacity	550 sheets
Duplex Printing	Optional
Standard Memory	256 MB
Network Connectivity	10/100/1000Base-T Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Max Paper Capacity	2, 100 sheets
Connectivity	USB 2.0, Ethernet
PDL	PostScript 3, PCL 6, PDF
Print Speed	Up to 35 ppm