Xerox PHASER 7500 - Configuration Card Parameters; General Information Parameters; Postscript Parameters

Configuration Card
Phaser 7500 Color Printer
System Administrator Guide
66
Configuration Card Parameters
General Information Parameters
• Printer Name
• Startup Page Enabled
• Printer ID
•Sys/Start Job
• Job Timeout
• Load Paper Timeout
•Menu Timeout
•Power Saver
•Power Saver Timeout
• Intelligent Ready
• Paper Source
•Tray 1 (MPT) Size and Type
•Tray 2 Size and Type
•Tray 3 Size and Type
•Tray 4 Size and Type
•Tray 5 Size and Type
Note: The Tray 3, Tray 4, and Tray 5 parameters are only stored on the printer configuration card if
the optional trays are available for your printer and installed.
•Tray 1 (MPT) Mode
•Tray 1 (MPT) Prompt
•Tray 2 - N Prompt
•Tray 2 - N Mode
• Letter/A4 Substitution
• Two-sided Printing
•Metric Defaults
PostScript Parameters
• Printer Quality
• Color Correction
•Error Info