Printing
Phaser 7500 Color Printer
User Guide
64
3. Load the paper with the long edge towards the left side of the tray.
•For single-sided printing, insert side one faceup, with the top of the paper at the rear of the
tray. Prepunched holes should be on the left side of the tray.
• For automatic 2-sided printing, insert side one facedown, with the top of the paper at the rear
of the tray. Prepunched holes should be on the right side of the tray.
Caution: Do not load paper or media above the fill line indicated on the tray. Overloading the tray
may cause jams.
7500-122
7500-121
7
-
4
To Next Page
Loading...
