Xerox Phaser 7760 Advanced Features Guide

Printer Settings
Phaser® 7760 Color Laser Printer
4-10
Using the Control Panel
To select a Tray 1 (MPT) mode setting on the control panel:
1. Select
Printer Setup, and then press the OK button.
2. Select
Paper Handling Setup, and then press the OK button.
3. Select
Tray 1 (MPT) Mode, and then press the OK button.
4. Select the appropriate setting, and then press the OK button.
Using CentreWare IS
To select a Tray 1 (MPT) mode setting using CentreWare IS:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the General folder on the left sidebar, and then select Printer Defaults.
5. Select the appropriate setting in the Tray 1 (MPT) Mode drop-down list.
6. Click the Save Changes button at the bottom of the page.

Xerox Phaser 7760 Specifications

General

Brand	Xerox
Model	Phaser 7760
Category	Printer
Language	English