Xerox Phaser 7760 Advanced Features Guide

Printer Settings
Phaser® 7760 Color Laser Printer
4-16
Setting the Default Stapling Option
If your printer has a finisher, the Stapling Options setting specifies the default for stapling
output. Print jobs use the default stapling option unless a different option is selected in the
printer driver when a job is sent to the printer.
To select the default stapling option, use one of the following options:
■ The printer’s control panel
■ CentreWare IS
Using the Control Panel
The factory default option for stapling is None. To set the default stapling option on the control
panel:
1. Select
Printer Setup, and then press the OK button.
2. Select
Paper Handling Setup, and then press the OK button.
3. Select
Stapling Options, and then press the OK button.
4. Select the appropriate stapling option, and then press the OK button.
Using CentreWare IS
To select the default stapling option using CentreWare IS:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select General on the left sidebar, and then select Printer Defaults.
5. Select the appropriate option from the Stapling Options drop-down list.
6. Click the Save Changes button at the bottom of the page.

Xerox Phaser 7760 Specifications

General

Brand	Xerox
Model	Phaser 7760
Category	Printer
Language	English