Xerox Phaser 8560 - Page 108

Maintenance and Cleaning
Phaser® 8560/8860 Printer
5-8
Replacing the Maintenance Kit
The maintenance kit contains a maintenance roller that keeps the surface of the imaging drum
clean and oiled.
Note: Order a new maintenance kit when the control panel displays a message that the
maintenance kit is low. Replace it when the control panel prompts you to replace the
maintenance kit.
To order a replacement maintenance kit, contact your local reseller or go to the Xerox Supplies
website for your printer:
■ www.xerox.com/office/8560Psupplies (Phaser 8560 printer)
■ www.xerox.com/office/8860supplies (Phaser 8860 printer)
To replace the maintenance kit:
1. Open the side door.
Warning: The printer’s interior may be hot. Do not touch the hot surfaces!
8860
p
-034