Xerox Phaser 8560 - Loading Paper in Tray 2, 3, or 4

Loading Paper
Phaser® 8560/8860 Printer
3-17
Loading Paper in Tray 2, 3, or 4
Use Tray 2, 3, or 4 for a wide range of media including:
■ Plain paper, letterhead, and pre-printed paper
■ Card stock
■ Labels
■ Envelopes: #10 Commercial, C5 (side-flap only), and DL
■ Transparencies
■ Specialty media (including photo paper, postcards, pre-punched paper, duradocument
paper, and trifold brochures)
■ Pre-printed paper (paper already printed on one side)
See also:
Supported Paper Sizes and Weights for Tray 2, 3, or 4 on page 3-8
Printing on Specialty Media on page 3-31
Printing Custom Size Paper on page 3-57
The media capacity for Tray 2, 3, or 4 is:
■ 525 sheets of plain paper (20 lb. Bond)
■ 400 sheets of transparencies, glossy paper, or labels
■ 40 envelopes