Moving and Repacking the Printer
Phaser® 8560/8860 Printer
5-17
Moving and Repacking the Printer
This section includes:
■ Precautions for Moving the Printer on page 5-17
■ Moving the Printer Within the Office on page 5-17
■ Preparing the Printer for Shipment on page 5-19
Caution: Parts of the printer are hot. To avoid personal injury or damage to the printer, allow
the ink to solidify. Run the
Shut Down for Moving Printer procedure on the control panel to
cool the printer quickly.
Precautions for Moving the Printer
To view precautions and guidelines for safely moving your printer, see User Safety on
page A-1 in this user guide.
Moving the Printer Within the Office
To move the printer within the office:
1. Close the printer’s door and covers.
2. Turn off the printer using the power switch located under the interface cover on the right
side of the printer.
To Next Page
Loading...
