Loading Paper
Phaser® 8560/8860 Printer
3-13
■ End-flap envelopes: Fold down the flaps before placing them in the tray. Insert the
envelopes with the flap side up and the flap entering the printer first.
■ Pre-punched paper: Insert the side to be printed facedown with the holes toward the
right side of the tray.
Note: When using pre-punched paper, adjust the print margins to accommodate the holes.
Printing over the holes may cause ink to transfer onto subsequent pages. A minimum
margin of 19 mm (0.75 in.) is recommended.
8860p-091
8860
-111
To Next Page
Loading...
