RReeppllaacciinngg SSttaapplleess iinn tthhee IInntteeggrraatteedd OOffffiiccee FFiinniisshheerr 22FFAA
Caution: Do not perform this procedure while the printer is printing.
1. Open the finisher front door.
2. To remove the staple cartridge, grasp the orange handle, then pull it firmly toward you.
3. Check inside the finisher for any loose staples and remove them.
4. Pinch both sides of the staple pack and remove the staple pack from the cartridge.
5. Insert the front side of the new staple pack into the staple cartridge, then push the rear side into
the cartridge.
210
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
Need help?
General
