4. Remove the new stapler cartridge from its packaging. Hold the tabs on both sides of the new
staple cartridge, then reinsert the staple cartridge into the original position in the finisher.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
5. Repeat the procedure for the other staple cartridge.
6. Close the finisher side cover.
RReeppllaacciinngg SSttaappllee CCaarrttrriiddggeess iinn tthhee OOffffiiccee FFiinniisshheerr
RReeppllaacciinngg SSttaapplleess iinn tthhee MMaaiinn SSttaapplleerr ooff tthhee OOffffiiccee FFiinniisshheerr
Caution: Do not perform this procedure while the printer is printing.
1. Open the finisher front door.
2. Reach into the finisher cabinet and pull the stapler toward you until it stops.
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
215
Maintenance
To Next Page
Loading...
Need help?
General
