Clearing Hole Punch Jams in the Office Finisher
and the Office Finisher LX
If the printer stops printing and reports a hole-punch jam, empty the hole-punch waste container. For
details, refer to the procedure for the finisher installed on your printer:
• Emptying the Hole Punch Waste Container in the Office Finisher
• Emptying the Hole Punch Container in the Office Finisher LX
After you empty the hole-punch waste container, locate and remove any paper jams.
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
267
Troubleshooting
To Next Page
Loading...
Need help?
General
