Symptom
Solutions
The top margin is incorrect.
• Ensure that the paper is loaded properly.
• Ensure that the margins are set correctly in the
application that you are using.
• Adjust the paper registration. For details, refer to
Adjusting Paper Registration.
The printed surface of the paper is bumpy.
1 Print a solid image over the entire surface of one
sheet of paper.
2 Load the printed sheet into the tray with the
printed side face down.
3 Print five blank pages to remove debris from the
fuser rollers.
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
273
Troubleshooting
To Next Page
Loading...
