4. Hold the tabs on both sides of the new staple cartridge and insert the cartridge into the original
position in the finisher.
Note: If you have trouble inserting the cartridge, ensure that the staples are positioned
correctly in the cartridge.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
5. Repeat the procedure for the other staple cartridge.
6. Close the booklet maker side cover.
Replacing Staples in the Convenience Stapler
1. To open the stapler head, rotate the stapler head 180 degrees counterclockwise.
206
To Next Page
Loading...
