Safety
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
11
• Plug the power cord directly into a grounded electrical outlet. Make sure that each end of the cord
is securely connected. If you do not know if an outlet is grounded, ask an electrician to check the
outlet.
• Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have
a ground connection terminal.
• Only use an extension cord or power strip designed to handle the electrical current capacity of the
printer.
• Verify that the printer is plugged into an outlet that provides the correct voltage and power.
Review the electrical specification of the printer with an electrician if necessary.
WARNING: Avoid the potential of electrical shock by ensuring that the printer is properly
grounded. Electrical products can be hazardous if misused.
• Do not place the printer in an area where people can step on the power cord.
• Do not place objects on the power cord.
The power cord is attached to the printer as a plug-in device on the back of the printer. If it is necessary
to disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet.
To Next Page
Loading...
Need help?
General
