How to fix missing characters on Xerox All in One Printer output?
To fix missing characters on your Xerox All in One Printer output, try loading fresh paper. If that doesn't work, reinstall the drum cartridge or replace the toner cartridge if the screen message for replacement is displayed.
How to fix blurred images from Xerox All in One Printer?
To fix blurred images from your Xerox All in One Printer, try loading fresh paper. If that doesn't work, replace the drum cartridge or the toner cartridge if the screen message for replacement is displayed.
How to fix uneven print on my Xerox All in One Printer?
To fix uneven print on your Xerox All in One Printer, consider replacing the drum cartridge or the toner cartridge if the screen message for replacement is displayed.
Why is the output from my Xerox All in One Printer too light or too dark?
If the output from your Xerox All in One Printer is too light or too dark, try loading fresh paper and checking the quality of the document. You can also select [Lighten/Darken] on the touch screen. Run off more prints until the copy quality improves, or replace the drum cartridge.
What to do if the document will not feed through the document feeder of my Xerox All in One Printer?
If the document won't feed through the document feeder on your Xerox All in One Printer, make sure the document feeder is not overloaded; it can hold a maximum of 50 sheets. Also, check that the document is fully inserted into the document feeder.
How to resolve streaks, solid or dotted lines, or spots on Xerox All in One Printer output?
To resolve streaks, solid or dotted lines, or spots on your Xerox All in One Printer output, clean the document glass, the CVT glass, the areas under the platen cover, the document feeder, and the paper guides. Completely remove the ROS cleaner and reinsert it to clean the raster output scanner. If the machine has been idle for an extended period, or if the toner or drum cartridge is new, begin the job again. Try running the job using the document glass. Reinstall the drum cartridge. Check the quality of the document and use [Edge Erase] to remove lines and marks from the edges. Load fresh paper and check the humidity of the machine location.
What to do if my Xerox All in One Printer displays a tray fault?
If your Xerox All in One Printer displays a tray fault, try the following: Open the paper tray, move the paper tray guides away from the paper, then move the paper tray guides against the paper so that they are just touching the paper. If the issue persists, power the machine off and then on.
Why my Xerox All in One Printer has blank output?
If you're getting blank output from your Xerox All in One Printer, ensure the document is loaded face up in the document feeder. If you have a new drum cartridge, the toner may not be dispensed; try repeating the job. Check that the seal tape has been removed from the new drum cartridge. Reinstall the drum cartridge and the toner cartridge. If problems persist, replace the drum cartridge or the toner cartridge if the screen message for replacement is displayed.
What to do if my Xerox All in One Printer displays a memory full error message?
If your Xerox All in One Printer is displaying a memory full error message, first, check with the Key Operator about available memory. Second, divide the remaining pages of the job into several smaller jobs and run the job again.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Printing Technology | Laser |
| Print Speed (Black) | 32 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Max Resolution (BW) | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Scan Resolution | 600 x 600 dpi |
| Copier Max Resolution | 600 x 600 dpi |
| Connectivity | Ethernet, USB |
| Scanner Type | Flatbed |
| Fax Speed | 33.6 Kbps |
| USB Connectivity | USB 2.0 |
| Media Size | A4, Letter, Legal |
| Copy Speed (Black) | 32 ppm |
| Display | Color Touch Screen |
| Network Connectivity | Ethernet |
Key steps to perform at the start of a service call.
Sequence of operations and decision points during a service call.
In-depth maintenance tasks guided by HFSI procedures.
Tests for image quality upon entry into the system.
Analysis and resolution for various image quality problems.
Visual examples and descriptions of common image defects.
To Next Page