Xerox WorkCentre 7225 System Administrator Guide

Customization and Expansion
WorkCentre 7800 Series Multifunction Printer 245
System Administrator Guide
Auxiliary Interface Kit
An Auxiliary Interface Kit, or a Foreign Device Interface Kit, is a third-party access and accounting device.
These kits, such as a coin operated printer accessory or a card reader, can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Accounting Settings.
3. Touch Accounting Mode > Auxiliary Access.
4. Touch Auxiliary Device Type and select your printer type.
5. Touch Save twice.
See also:
Accounting on page 199
Local Authentication on page 68

Xerox WorkCentre 7225 Specifications

General

Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Standard
Functions	Print, Copy, Scan, Fax
Memory	2 GB
Fax Speed	33.6 Kbps
Print Speed	Up to 25 ppm
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Hard Drive	160 GB
Operating System Compatibility	Windows, Mac OS, Linux
Dimensions	640 x 670 x 1135 mm (with optional feeder)