Security
70 WorkCentre 7800 Series Multifunction Printer
System Administrator Guide
6. Type the appropriately formatted address and port numbers for both the primary and backup
addresses.
Note: A backup address is optional.
7. If you want to use an LDAP server for network authorization or personalization:
a. Click Add LDAP Mapping.
b. Select the LDAP server from the list and click Add Mapping, or click Add New to add an LDAP
server.
8. Click Save.
9. To specify server settings for an alternate authentication server, click Add New.
10. To copy the settings from another server, select a server from the list and click Copy From.
11. Click Edit to update the settings.
Configuring Authentication Server Settings for NDS
1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select NDS (Novell).
Note: If you do not see this authentication type, ensure that the NetWare protocol has been
enabled under Connectivity > Setup > NetWare > Edit.
3. Click Add New.
4. Under Default Tree/Context, in the Tree and Context fields, type the details.
5. Click Save Server.
6. To specify server settings for an alternate authentication server, click Add New.
7. To copy the settings from another server, select a server from the list and click Copy From.
8. Click Edit to update the settings.
Configuring Authentication Server Settings for SMB
1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select SMB (Windows NT 4) or SMB (Windows 2000/2003).
3. Click Add New.
4. Under Domain, type the domain name of your authentication server.
5. Select the address type.
6. Type the appropriately formatted address and port number.
7. Click Save.
8. To specify server settings for an alternate authentication server, click Add New.
9. To copy the settings from another server, select a server from the list and click Copy From.
10. Click Edit to update the settings.
To Next Page
Loading...
Need help?
General
