Xerox WORKCENTRE 7425

19
Set S/MIME
Note:
• To use E-mail with this machine, E-mail function has to be enabled and configured as stated in the System
Administrator Guide’s "Scan to E-mail".
• Before S/MIME setting, you will have to Import an S/MIME certificate according to same procedure as
"Configuring Machine Certificates" (3.4).
1. Click [Configuration Overview] on the [Properties] screen.
2. Click [Settings] for [E-mail].
3. Click the [Configure] button for [E-mail Settings], and enter the machine’s E-mail address in the [From address]
box.
4. Click the [Apply] button.
5. Click [+] on the left of the [Security] folder on the [Properties] screen.
6. Click [Certificate Management].
7. Select [S/MIME] for [Certificate Purpose].
8. Click the [Display the list] button, and check a desirable Certificate.
9. Click the [Certificate Details] button.
10. Click the [Use this certificate] button.
11. Click [SSL/TLS Settings].
12. Check the [Enabled] box for [S/MIME Communication].
13. Click the [Apply] button.
14. Click the [Reboot Machine] button.
15. After the machine is restarted, refresh the browser and Click [Properties] tab.
16. Click [+] on the left of the [Security] folder.
17. Click [S/MIME Settings].
18. Uncheck the [Enabled] check box for [Receive Untrusted Email].
19. Click the [Apply] button.