Xerox WorkCentre 7556 User Manual

Troubleshooting
WorkCentre 7500 Series Multifunction Printer 233
User Guide
5. Hold the tabs on both sides of the new staple cartridge and insert it into the original position in the
finisher.
Note: If you have trouble inserting the cartridge, make sure the staples are positioned correctly in the
cartridge.
Note: The Booklet Maker uses two staple cartridges. Booklet stapling requires that both staple
cartridges contain staples.
6. Starting at Step 2, repeat the procedure for the other staple cartridge.
7. Close the side cover of the finisher.
Clearing Main Staple Jams in the Professional Finisher
WARNING: Do not perform this procedure while the printer is copying or printing.
1. Open the front door of the finisher.
2. Hold the staple cartridge unit by orange lever R1 and push it to the right.

Xerox WorkCentre 7556 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	55 ppm
Print Resolution	1200 x 2400 dpi
Copy Speed (Black)	55 ppm
Copy Resolution	600 x 600 dpi
Maximum Paper Capacity	5, 140 sheets
Monthly Duty Cycle	Up to 300, 000 pages
Processor	1.2 GHz
Memory (Standard)	2 GB
Hard Drive	160 GB
Copy Speed (Color)	50 ppm
Scan Resolution	Up to 600 x 600 dpi
Paper Sizes	A3, A4, A5, B4, B5
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
PDL	PCL 5c, PCL 6, PDF
Mobile Printing	Apple AirPrint, Xerox Mobile Print
Print Speed (Color)	50 ppm
Duplex Printing	Automatic