EasyManuals Logo

Xerox WorkCentre 7556 User Manual

Xerox WorkCentre 7556
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Troubleshooting
WorkCentre 7500 Series Multifunction Printer 235
User Guide
Clearing Booklet Staple Jams in the Professional Finisher
The stapler in the booklet maker uses two staple cartridges labeled R2 and R3. Booklet stapling requires
that both staple cartridges be free of jammed staples.
WARNING: Do not perform this procedure while the printer is copying or printing.
1. Open the front door of the finisher.
2. While squeezing orange levers R2 and R3 together (1), pull the staple cartridge unit out of the
finisher until it stops (2).
Note: The staple cartridge unit does not detach from the finisher.
1
2
3. Grip the orange tabs on both sides of the staple cartridge.

Table of Contents

Other manuals for Xerox WorkCentre 7556

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 7556 and is the answer not in the manual?

Xerox WorkCentre 7556 Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, Copy, Scan, Fax
Print Speed (Black)55 ppm
Print Resolution1200 x 2400 dpi
Copy Speed (Black)55 ppm
Copy Resolution600 x 600 dpi
Maximum Paper Capacity5, 140 sheets
Monthly Duty CycleUp to 300, 000 pages
Processor1.2 GHz
Memory (Standard)2 GB
Hard Drive160 GB
Copy Speed (Color)50 ppm
Scan ResolutionUp to 600 x 600 dpi
Paper SizesA3, A4, A5, B4, B5
Connectivity10/100/1000Base-T Ethernet, USB 2.0
PDLPCL 5c, PCL 6, PDF
Mobile PrintingApple AirPrint, Xerox Mobile Print
Print Speed (Color)50 ppm
Duplex PrintingAutomatic

Related product manuals