234
Reset User Limits
At your Workstation
1. Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field.
Press [Enter].
2. Click the [Properties] tab.
3. Select the [Accounting] link.
4. Select the [Xerox Standard Accounting] link.
5. Click the [Report and Reset] link.
6. To reset all usage data to 0, click the [Reset Usage Data] button.
7. Click [OK] to confirm.
WARNING! The following step will delete all the XSA accounts set up for your machine!
8. To delete all user, group and general accounts, click the [Reset to Default] button.
To Next Page
Loading...
